2021 Rubicon, Well Built

It pains me to sell my baby but the time has come, I don't want or need to sell but it is in my best interest so here are the details and feel free to ask any questions. I built this with the intention of never getting rid of it but life happens, you can see from the build list no junk was used and no corners were cut. You can drive this Jeep 80 mph on the highway, go crawl 8 and 9 rated trails, rip sand at 30+ mph and then get back on the highway and drive 80 mph. The build was done to have a great daily driver and a very capable off road rig. I've led 20+ Jeeps through 8 rated trails at Sand Hollow in this rig with ease, hitting every hard line with pure joy. Just writing this makes me not want to sell. 

2021 Jeep Wrangler Unlimited Rubicon in Sarge Green with Saddle Tan leather interior, 74k miles, 2.0 Turbo, 8spd auto, Fully Loaded: 8" screen, tow package, LED package, cold weather package, leather heated seats, heated steering wheel, safety group, Alpine stereo, Off Road Plus, Aux switches, lockers, Hardtop, clean title. Grill has wider opening inserts from a 2023 grill and hood vents have been cut open to allow heat out. This thing can rock crawl in 100+ temps with the AC blasting and never get hot.
VIN 1C4HJXFN6MW615716Asking $55,000 OBO.  New Falken Wildpeak RT 38x13.5r17 tires with less than 10,000 miles on them - $2000
Brand New Ultimate Dana 44 front axle installed by Sand Hollow Off-Road in 12/24- $5800Professional alignment setting tow and putting caster at 6.6 degrees - $200
Dana/Spycer rear chromoly axle shafts - $400
RPM 2.5 ton tierod and draglink - $1000RPM front trackbar - $300RPM rear trackbar - $300SteerSmarts Sector Shaft Brace - $275Next Venture Hydro Assist Steering Axle Mount - $130Hydro Assist Steering - Steering box ported and hydraulic lines run to PSC steering ram - $915Apex Autolynx sway bar links - $450Rock Krawler rear sway bar links - $90Rock Krawler bump stops front and rear - $230Metalcloak Duro Spring jounce stops front and rear - $90 Rock Krawler Adventure Series control arms with new bushings - $1330Metalcloak Front geometry correction brackets - $290Metalcloak Rear geometry correction brackets - $400
Teraflex 3.5" springs - $420Teraflex Factory Replacement CV Joint Kit – High-Angle Rzeppa - $190 (Also have a second one for a spare)ADS Racing Shocks - $2900Metalcloak Front Outboard Shock Mount Spacers - $110
Dirty Life Enigma beadlocks - $1700 Apex Rapid Deflate Valves - $120
Motobilt Spare Tire Delete - $150Motobilt front inner fender liners - $250
Motobilt front Crusher bumper - $660Motobilt rear Crusher bumper - $620SuperWinch 10k synthetic winch with wired and wireless remotes - $765Hooker Blackheart High clearance axle-back muffler - $435
Factor55 flat link - $130KBD fenders - $420Tazer - $329Lange Coyote Mirrors for when the doors are off - $120
Heavy duty rubber full coverage floor mats and cargo liner - $180Rockslide Engineering tailgate table - $275
Parts alone were $24,000 not including labor.

More photos upon request.

Yes, the interior back windows and door panels need to be cleaned and will. I have a dog and didn't have time to clean. Also all control arms, axle housing etc... will be touched up with black satin paint. Winter and wheeling have chipped some paint off.